GRAIN BELT HEADER

Request a Quote Find a Dealer

Increase your combine capacity

For decades, the Honey Bee Grain Belt Header has defined harvest efficiency. It uniformly feeds the crop heads first, providing consistent harvest speeds, superior threshing and less down time.

Using a tried-and-true draper and feed auger system that has become a mainstay for farmers, the Grain Belt Header not only ensures proper feeding of cereal crops, but also dramatically improves feeding of bulky crops like peas and mustard.

With low maintenance features including an oversized oil cooling reservoir and heavy duty 3/16″ (0.48 cm) tubular steel header mainframe, the Grain Belt Header is designed to last.

Features

Knife Drive

The knife is driven by a 3 5/16″ (8.4 cm) stroke, epicyclic knife drive that ranges from 1,284–1,400 strokes per minute (depending on make of combine), eliminating fore/aft movement. The knife drive is driven by a low-maintenance hydraulic drive motor. Optional double knife drive systems are available.

Independent Hydraulic System

The independent hydraulic system allows you to easily fit the Grain Belt Header to any combine. If you change combines, you can switch the header to the new combine simply by changing the adapter.

Deck and Feed Auger

Fasten your seat belt. The 68″ (172.7 cm) centre deck, combined with the 72″ (182.9 cm) feed auger with retractable fingers, smoothly feeds the crop into the feeder housing without twisting or tangling. A hinged door under the centre deck allows easy cleaning of foreign material like rocks and roots that might jam the feeder.

Adjustable Castoring Gauge Wheels

Adjustment to cutting height is now a breeze — simply pull a pin and push a lever. The Grain Belt Header also has an incredible floatation of eight inches.

See more

Hydraulic Header Tilt

The hydraulic header tilt adjustment is equipped with a ball and socket on both ends, improving header floatation.

Low Profile Cutterbar

The cutterbar height is now the lowest in the industry. In addition, the profile has been changed o reduce the height the crop has to move from the knife to the draper by 50%.

Draper Speed Control

Draper speeds are hydraulically controlled and adjustable. Independent control over the drapers gives you the power to move heavy material smoothly and efficiently.

Crop Divider

The improved crop divider flows seamlessly through the heaviest of crops, reducing crop trampling.

Lateral Leaf Spring Float System

Draper speeds are hydraulically controlled and adjustable. Independent control over the drapers gives you the power to move heavy material smoothly and efficiently.

Draper Tension and Tracking

The canvas can be adjusted for tracking and tightening, which creates even tension on both the front and rear of the rollers. A quick-release lever allows for ease of canvas and roller cleaning.

Options

Dual Wheel Hitch Carrier

Allows for easy towing of your combine header behind a pickup truck or combine. Easily transport your header through gates and down narrow roads. The hitch carrier can be used with the Detachable Storage Transport or Integral Storage Transport.

Cross Auger

Hydraulic drive cross augers assist in material flow from the drapers to the feed auger. The auger is adjustable to match varying crop conditions and increases combine capacity in bulky crops like peas and mustard. Augers are size-specific.

Detachable Storage Transport

Hitch, jack and axle combination allow header to be stored and transported when not in use.

Integral Storage Transport

The self-contained integral transport including hitch, jack and axle are conveniently stored on the header table.

CROP TYPES

See what crops work with the Grain Belt Header
Download Compare Models PDF
Cereals (Wheat, Barley, Oats)
Triticale
Sorghum
Hemp

Specs

SpecificationsSP21SP25SP30SP36SP40SP42
Width21′ (6.4 m) 25′ (7.62 m) 30′ (9.1 m) 36′ (10.9 m) 40′ (12.2 m) 42′ (12.8 m)
Operating Weight 4,830 lbs (2,190 kg)5,750 lbs (2,608 kg)6,834 lbs (3,100 kg)7,600 lbs (3,450 kg)8,070 lbs (3,660 kg)8,289 lbs (3,760 kg)
Hydraulic System Self contained hydraulic system on the header. Double gear pump with step-up gear box driven off bottom feeder housing shaft.
Header Floatation Leaf spring float system standard on all models.
Cutting System SCH Easy Cut, spring steel guards, bolted sections.
Knife Drive SCH Epicyclic 3 5/16″ (8.4 cm) stroke, hydraulically driven, approximately 1,284 – 1,400 strokes per minute (depending on make of combine).
Knife DriveSingle or DoubleDouble
Draper 42″ (106.7 cm) wide rubberized polyester, fibreglass reinforced rubber slats. Hydraulically driven, speed adjustable from approximately 0 – 575 fpm (175.3 mpm).
Centre Deck Hydraulically driven, 68″ (172.7 cm) wide centre canvas. Speed adjustable on header.
Feed Auger Mechanically driven, 18″ x 72″ (45.7 cm x 182.9 cm) retractable finger auger.
Reel(s) 1 – 21′ (6.4 m) 1 – 25′ (7.62 m) 1 – 30′ (9.1 m) 1 – 36′ (10.9 m) 2 – 20′ (6.1 m) 2 – 21′ (6.4 m)
Reel(s) Pickup Reel – Universal UII (Series 2) 6 bat plastic fingers only.
Reel(s) HCC Pickup Reel (flip over design c/w end tine pkg – 6 bat – assembled)
Reel(s) Honey Bee – 6 bat plastic fingers with either 2 1/2 inch or 5 inch spacing
Reel Drive Standard – using combine Hydraulic System. Header driven reel optional. Reel speed adjustable in cab.
Gauge Wheels N/AStandard
Header Height Control Optional
Storage Transport Integral OptionalStandard
Storage Transport Detachable OptionalN/A**2@@
Tires/Wheels/Hubs/Spindles Standard
Cutterbar Poly Skid Standard
Combine Adapters Available for most models of self-propelled combines.
Cross Auger Size Specific21′ (6.4 m) (1pc)25′ (7.62 m) (1pc)30′ (9.1 m) (3pc)36′ (10.9 m) (3pc)40′ (12.2 m) (3pc)42′ (12.8 m) (3pc)
Hydraulic Header Fore/Aft Tilt Standard
Automatic Reel Speed ControlOptional – Available on most current production combines. Combine must be equipped with Automatic Reel speed circuit.
Vertical Knife Ready Optional
Dual Wheel Hitch Carrier Optional
Download Brochure

Contact your local territory representative

Phone: (306) 296-2297
Email:

"*" indicates required fields

Hidden